How do I set up the manual lock on my Ploom device?

Ploom AURA

Here’s how to set up the manual lock feature on your Ploom AURA device:

1. Place your Ploom AURA on charge using the USB-C cable.

2. Open and close the slider.

3. Press the button area twice.

4. Press the button area again and hold until the device vibrates and the LED indicator starts blinking slowly.

5. While the LED indicator is blinking, you have 20 seconds to enter a combination of slider movements and/or button area presses (up to 10 inputs). The combination you choose will be your code for manually unlocking the device.

6. The device will vibrate, and the LED indicator will blink to confirm that the code has been successfully set.

To unlock the device, simply enter your unique combination/code. You have 2 seconds for each input. The device will vibrate when unlocked.

For more information, watch our short video.

Ploom X Advanced

You can lock your Ploom X Advanced device with a code made of a combination of button presses and slider movements, so only you can unlock it. Here’s how to set up manual locking:

1. Connect your Ploom X Advanced to the charger.

2. Open and close the slider cover.

3. Press the button area until Ploom X Advanced vibrates.

4. The LED indicator will blink for about 20 seconds. During this time frame, enter a combination of button area presses and/or slider movements. You can use a minimum of 3 and a maximum of 10 movements. This will be your code for unlocking the device.

5. After 20 seconds, the device will vibrate, and the LED light will blink twice.

6. Your unique combination is now set, and the device is locked.

Before each use, you will need to enter this combination, which only you know, to unlock your device.